Installing your new Walltastic mural is very easy. Just watch this short video or read on.

BEFORE YOU START.

Ensure that you have allowed enough time to complete the mural in one session. It usually takes in the region of one hour. Please also ensure that you have the right equipment needed. You will need the following equipment to complete your mural.

1 - Wallpaper Paste.

2 - Pasting brush ( a large paint brush will work also ). 

3 - Sharp Knife or Scissors. 

4 - Sponge or smoothing brush.                                                                                                                                               

INSTALLING THE PANELS.

Your new Walltastic® will come in 12 pieces. 

Since the placement of your first panel determines the overall look of your mural we suggest you take extra time and care to place it accurately.

Follow the manufacturer's instructions on the order of panel installation. Do not wait too long between installation of each panel or the panel designs will not line up correctly. The mural begins to dry and contract once on the wall, so be prepared to proceed with each panel until the job is done before taking a break. It is common for each panel of a wet mural to be 1.25cm larger than a dry mural. Carefully remove excess paste from the front of the mural using a soft cloth.

INSTRUCTIONS.

1. Select piece number 1
2. Lay strip face down on a flat surface. Apply wallpaper paste and position to the wall
3. Repeat steps for pieces 2 to 12.